Pre-cut polymer film tape with a high performance adhesive designed for tacking wires. Wire Dots make the job of bonding jumper wires neat and fast.
Flexible anti-static polymer film solder paste stencils with a residue-free adhesive backing.
The most complete and most versatile circuit board repair kit you'll find anywhere, including pads, lands, conductors, base material and plated holes.
Circuit Frames with dry-film adhesive backing make a delicate repair procedure easy, fast and highly reliable.
A variety of cable including HSD Cable, Fakra Cable, USB Type-C, HDMI Cable, Waterproof USB Cable, etc.
FAKRA series, HCMTD Connector, HDMI Connector, USB 2.0&3.2 Connector, Waterproof D-Sub Connector, etc.
The finished product including the OTG series and Smart cable.
WLCSP is the smallest diode in the world, DFN0402 (01005) package. Comchip’s WLCSP is a full package with 6 sides epoxy protection.
Load dump TVS is mainly protects the circuit by clamping down the surge voltage which is generated by the generator during load dump mode.
General Purpose Rectifier lets electrical current flow in only one direction and is mainly used for power supply operation.
The MOSFET transistor is a semiconductor device that is widely used for switching purposes and for the amplification of electronic signals in electronic devices.
Fast Recovery Diode is a semiconductor device which possesses short reverse recovery time for rectification purpose at high frequency.
Trench Schottky diodes deliver a better trade-off between forward voltage drop and the leakage current.
The ddm hopt+schuler miniature coded rotary switch 527, can be supplied in different variants with BCD-, Hexa- or Gray-Code. With different knob and axis variants, the coded switch can be individually adapted to your requirements.
The RFID paper ticket dispenser 901 is the solution for processing and printing Mifare contactless paper tickets according to ISO 14443. The dispenser has both an RFID reader and a thermal printer.
Landing contacts in line with ISO 8 Modular construction (means customers can use their own solutions, especially easy to maintain) Pull through (card release to rear) meaning card can be retained
Precisely controlled probe travel Step tip geometry Replaceable and non- replaceable version Plating options available
Proven designs Varying package dimensions Medical/defense/ruggedized industrial application
Lead Free probes incorporates a harder and slicker plating that not only resists wear but also reduces solder and debris transfer
Board Marker Probe patented design is for installation on bare board or loaded board test fixtures
This product tests high speed circuits in a variety of industries including automotive, wireless communications, satellite, and more.
VG mass interconnect from ECT is a series of modular test system interface products that allow quick connection of a DUT (device under test) to a custom test system.
ECT has a long history manufacturing state of the art dsingle-ended and double-ended fine pitch probes. These probes are traditional but ouble ended probes ranging from 0.4mm to 1.27mm pitch. Pull through (card release to rear) meaning card can be retained
Pylon Pogo® Contact for Board Test, Battery Interconnects, Medical Devices and other Momentary Electrical Contacts.
The FINN® is a compact and durable LED sensor, providing color-specific LED testing for red, green, blue, clear, UV or IR LEDs
Smart FINN™ delivers full color and brightness readings with speed and ease. The Smart FINN™ is placed in front of the LED under test with no critical spacing or fiber-optic cables to install or maintain.
Mega FINN™ measures most LEDs in less than 3 milliseconds, automatically triggering when it detects an LED turn on and adjusting its sampling to quickly deliver an accurate measurement.
The Mega FINN Module combines all of the accuracy and speed found in the Mega FINN with an easy to use. Test up to 254 LEDs with a single USB cable or RS232 cable.
Fischer offers a wide range of various kinds of heatsinks, including processor heatsinks, fluid coolers, board level heatsinks as well as cooling aggregates and accessory for electronic devices
FischerElektronik offers connectors in various versions, including Sockets, PCB coonectors, IDC connectors, USB/RJ/D-Sub connectors, Brackets and devices from the optoelectronic range.
Thermal conductive can be based on silicone elastomer or other plastics, equipped additionally with a durable or adhesive coating and is available in different thicknesses and designs. Best suitable for the field of heat dissipation.
Fischer Elektronik is offering a wide range of cases in different designs. Shelf-, profile mounting, desk and euro cases are made for the acceptance of euro-cards, but also for non-standard devices. All devices of the case can be printed in different RAL colours or can be surface treated.
Aluminium electrolytic capacitors consist of aluminium foil, paper and an electrolyte as a conductive liquid.
Film capacitors are manufactured from a coated plastic film. The advantages of this type are high ripple current capacity and inductance, a very long life and good temperature resistance up to 100 °C.
The technological advantages of the FischerLink are extremely low inductance, a larger capacity volume and a very long life.
More than 65 % of products are new developments that custom manufacture for customers.
Smart card connector, SIM card connector and Memory card connector
USB Type C, Micro USD, Mini USB
BTB Connector, RF Series, Spring Hardware Shrapnel and Battery Connector.
Our high precision gears and custom gearbox solutions meet quality standards up to AGMA Q12 or AGMA 2015/ISO 5 specifications.
Our precision turned parts typically range in diameter from 0.3mm (.0118”) to 32mm (1.25”) with tolerances less than 10μm (0.0004").
Our engineers work side by side with OEMs, as an extension of their development teams to engineer custom gear trains and electromechanical assemblies over many generations of a product platform.
From miniature connectors to implantable medical device components, Precipart’s legacy and continued expertise lie in the production of precision miniature parts and micro components with features measured in microns.
Precipart injection molds, presses, machines and shapes a range of ceramic materials for custom applications. Parts typically range in size from 0.3mm (.0118”) up to larger shapes of 30mm (1.18”) with tolerances less than 5 -10μm (0.0002" - 0.0004").
RDIq USB Fast Charge Power Adapters deliver USB PD (Power Delivery) and Qualcomm QC 3.0 fast charging to a wide variety of common devices such as smartphones, tablets, laptops and portable medical devices.
Switches includes micro, sub-miniature, miniature and power slide, rocker, lever, toggle, paddle, DIP/SIP and tactile solutions.
Great for all PCB audio applications including Lavaliere & headset mics, digital audio, security systems, voice control and computer systems.
RDI extensive line of custom Cables Assemblies includes audio, Ethernet, AC and DC power, HDMI, USB and medical grade assemblies.
Our product range of fleible LED strips in single color versions, different white colors, dual-white colors and also in RGB and RGBW.
Full line product range of our miniature indicator lights for harsh environments in metal and plastic housings, available with various colours for applications.
Ready to use aluminium profile led lamps with warm-, nature- and cold white LED. Available in different designs, shapes and lengths.
Selection of our 3 & 5mm THT LED, SMD LEDs and as well Power LED The THT LED are available in various colours and intensities, also available are SMD LEDs as RGB.