Description
Ideal for Engineers and Technicians to carry in tool case for rework on location.
Kit Contents
– CHIPQUIK SMD4.5 – 4.5 ft. Removal Alloy with Instructions
– SMD291AX – No-Clean Sn63/Pb37 Rework Solder Paste in 5cc syringe
– SMDSW.031 1OZ – Solder Wire Sn63/Pb37 .031″ diameter
– SMD291ST8CC – No-Clean Paste Flux in 8cc squeeze tube with nozzle and cap
– Liquid Flux Remover/Cleaner – 1/2oz Container with Applicator, non-flammable
– SOLDERWICK1.5 – No-Clean ESD Safe Solder Wick – 5 ft 1.5mm wide
– Handi-Vac Tool – SMD Pick & Place Tool / with 3 Tips
– Acid Brush – Qty 2 – 3/8″ wide
– Probe Kit – qty 4 – Stainless Steel Non-Magnetic Dental Picks – for SMD Removal & Placement
– Precision Tweezers – qty 1 – Non-Magnetic – for SMD Removal & Placement – for Chip Components
– Cleaning Wipes – qty 6 – Tight Weave / Low Lint 4″x4″ – for Cleaning PC Board
– Swabs – qty 10 – Double Ended – for PC Board Cleanup
– Alcohol Pads – qty 6 – for PC Board Clean Up
– CHIP QUIK SMD Rework Instructions
Shelf Life
Refrigerated >12 months, unrefrigerated >6 months
SMD291AX Solder Paste: Refrigerated >12 months, unrefrigerated >6 months
SMD291ST8CC Flux: Refrigerated >24 months, unrefrigerated >24 months
Storage and Handling
SMD291AX Solder Paste: Refrigerate at 3-8C (37-46F). Do not freeze. Allow 4 hours for solder paste to reach an operating temperature of 20-25C (68-77F) before use.
